| 1.1 | Electrical Safety & Industrial Fundamentals | Industrial electrical safety and isolation |
| 1.2 | Electrical Safety & Industrial Fundamentals | Three-phase power, protection and earthing |
| 1.3 | Electrical Safety & Industrial Fundamentals | Industrial components and control-panel anatomy |
| 1.4 | Electrical Safety & Industrial Fundamentals | Using meters and industrial test equipment |
| 2.1 | Drawings, Control Circuits & Panel Design | Reading single-line and schematic drawings |
| 2.2 | Drawings, Control Circuits & Panel Design | Contactors, relays and motor starters |
| 2.3 | Drawings, Control Circuits & Panel Design | Control power supplies and 24 VDC systems |
| 2.4 | Drawings, Control Circuits & Panel Design | Panel layout, EMC and documentation |
| 3.1 | Motors & Motor Control | Induction motor principles and nameplates |
| 3.2 | Motors & Motor Control | Direct-on-line, star-delta and reversing starters |
| 3.3 | Motors & Motor Control | Motor protection and condition monitoring |
| 3.4 | Motors & Motor Control | Motor fault finding |
| 4.1 | Pumps & Pumping Systems | Pump types, curves and system head |
| 4.2 | Pumps & Pumping Systems | Pump starters, interlocks and level control |
| 4.3 | Pumps & Pumping Systems | Pump commissioning and performance testing |
| 4.4 | Pumps & Pumping Systems | Pump fault finding and cavitation |
| 5.1 | Variable Speed Drives (VSDs) | VSD principles, selection and installation |
| 5.2 | Variable Speed Drives (VSDs) | VSD parameters and commissioning |
| 5.3 | Variable Speed Drives (VSDs) | VSD process control and PID |
| 5.4 | Variable Speed Drives (VSDs) | VSD faults, harmonics and troubleshooting |
| 6.1 | PLC Hardware & I/O | PLC architecture and scan cycle |
| 6.2 | PLC Hardware & I/O | Digital inputs and outputs |
| 6.3 | PLC Hardware & I/O | Analogue inputs and outputs |
| 6.4 | PLC Hardware & I/O | Remote I/O and redundancy |
| 7.1 | PLC Programming | Ladder logic fundamentals |
| 7.2 | PLC Programming | Sequences, state machines and interlocks |
| 7.3 | PLC Programming | Functions, data structures and reusable code |
| 7.4 | PLC Programming | PLC diagnostics, online changes and backups |
| 8.1 | Instrumentation & Process Measurement | Measurement principles and P&IDs |
| 8.2 | Instrumentation & Process Measurement | Pressure, flow, level and temperature instruments |
| 8.3 | Instrumentation & Process Measurement | 4–20 mA loops, calibration and loop checks |
| 8.4 | Instrumentation & Process Measurement | Instrument fault finding and signal quality |
| 9.1 | Industrial Ethernet & TCP/IP Networking | Ethernet and TCP/IP fundamentals |
| 9.2 | Industrial Ethernet & TCP/IP Networking | Managed switches, VLANs and network design |
| 9.3 | Industrial Ethernet & TCP/IP Networking | Network diagnostics and packet analysis |
| 9.4 | Industrial Ethernet & TCP/IP Networking | Industrial network cybersecurity |
| 10.1 | Modbus Communications | Modbus RTU fundamentals |
| 10.2 | Modbus Communications | RS-485 wiring and serial troubleshooting |
| 10.3 | Modbus Communications | Modbus TCP configuration |
| 10.4 | Modbus Communications | Modbus data mapping and diagnostics |
| 11.1 | DNP3, Telemetry & Remote Sites | DNP3 concepts and object model |
| 11.2 | DNP3, Telemetry & Remote Sites | DNP3 controls, events and time synchronisation |
| 11.3 | DNP3, Telemetry & Remote Sites | Radio, cellular and IP telemetry design |
| 11.4 | DNP3, Telemetry & Remote Sites | Remote-site power, alarms and diagnostics |
| 12.1 | SCADA & Wonderware | SCADA architecture and tag databases |
| 12.2 | SCADA & Wonderware | Wonderware/InTouch application development |
| 12.3 | SCADA & Wonderware | SCADA alarms, trends and operator usability |
| 12.4 | SCADA & Wonderware | SCADA security, deployment and backups |
| 13.1 | Alarms, Historians, Data & Integration | Alarm management lifecycle |
| 13.2 | Alarms, Historians, Data & Integration | Historians and data quality |
| 13.3 | Alarms, Historians, Data & Integration | Reports, KPIs and dashboards |
| 13.4 | Alarms, Historians, Data & Integration | OPC, APIs and system integration |
| 14.1 | Fault Finding & Maintenance | Systematic fault-finding method |
| 14.2 | Fault Finding & Maintenance | Intermittent faults and event reconstruction |
| 14.3 | Fault Finding & Maintenance | Preventive and predictive maintenance |
| 14.4 | Fault Finding & Maintenance | Spares, backups and lifecycle management |
| 15.1 | Commissioning, Projects & Professional Practice | Control narratives, I/O lists and functional design |
| 15.2 | Commissioning, Projects & Professional Practice | FAT, SAT and commissioning documentation |
| 15.3 | Commissioning, Projects & Professional Practice | Change control and safe modifications |
| 15.4 | Commissioning, Projects & Professional Practice | Capstone integrated industrial project |
